Motion Operation

Motion Operation triggers when the device is moved in a registered direction.
Attaching the device to a body part (wrist, ankle, etc.) enables joint movements to act as switch inputs.

Caution

Motion Operation cannot be used together with [Touch “moving hand while touching”], [Hello Operation], or [Gaze Operation].

Play when device is moved

Setting	Description
On/Off	Enable or disable motion detection
Play reset sound	Plays a sound when the device returns to its starting position

About the reset sound

In this mode, after performing a movement, the device must return to the starting position.
Enabling the reset sound provides audible confirmation that the starting position has been reached.

Calibration

When Motion Operation is enabled and you enter the play screen, the calibration screen opens automatically.
Follow the on-screen instructions to register the start and end positions of your movement.

1. Screen 1: “The device will learn your movement. Follow the instructions to register the start and end positions.”
   → Tap to proceed

2. Screen 2: “Tap to register the start position of your movement.”
   → Hold the device in the desired start position and tap

3. Screen 3: “Tap to register the end position of your movement.”
   → Hold the device in the desired end position and tap

Usage Tips

• Use with repetitive movements: Works well for activities involving repeated motion, such as stepping or abdominal exercises.
• Keep the core body stable: Use in a posture where the torso doesn’t move much, such as sitting in a chair.
• Moving or changing direction: Tilt the device vertically for more stable detection while moving or rotating.