External Device Settings
External Device Settings configure how the app sends commands to BLE devices in response to input.
External Device Operation Mode
Section titled “External Device Operation Mode”Choose how commands are sent to the BLE device.
| Mode | Behavior |
|---|---|
| Latch | Sends Command-A when feedback starts, Command-B when it ends |
| One-Shot | Sends Command-A when feedback starts, then immediately sends Command-B |
| Toggle | Alternates between Command-A and Command-B each time feedback starts |
Input Device
Section titled “Input Device”Connect to MESH
Section titled “Connect to MESH”Connect to MESH, the IoT block from Sony Corporation.
Developed and tested with the Move Block (MESH-100AC).
Tilting or shaking the Move Block triggers Touch & Beep Connect.
Combined with an output device, you can set up configurations such as “move the MESH block → activate MaBeee.”
Output Devices
Section titled “Output Devices”MaBeee
Section titled “MaBeee”Connect to MaBeee, the AA-battery-sized IoT device by Novars Inc.
MaBeee for School (green) is also supported.
Tap [Connect to MaBeee (blue/green)] and the app automatically finds and connects to the nearest MaBeee.
BLE Connect Center
Section titled “BLE Connect Center”For other BLE devices, see BLE Connect Center.